Slow ethernet connection, BCM5722, tg3 driver you need to update-pciids as root Ethernet controller: Broadcom Limited NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Dell NetXtreme BCM5722 Gigabit Ethernet PCI Express Kernel driver in use: tg3 You can update the pci-id definition with the following command as root: Code: update-pciids
Kernel Panic – not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Start with a livecd, open a a terminal sudo fdisk -l sudo mount /dev/sdax /mnt sudo mount –bind /dev /mnt/dev sudo mount –bind /dev/pts /mnt/dev/pts sudo mount –bind /proc /mnt/proc sudo mount –bind /sys /mnt/sys sudo chroot /mnt and now you can… Leer más »
install arch: yaourt qikec note: yaourt shrew (client gui vpn is not working, so manual mode ) convert psk to base64 for example 12345678 to base64 -> MTIzNDU2Nzg5MA== b:auth-mutual-psk:MTIzNDU2Nzg5MA== https://www.base64decode.org/ put configuration file .ike/sites n:version:4 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:0 n:client-dns-used:0 b:auth-mutual-psk:XXXXXXXXXXXXXXXXXXXXXX <– PresharedKey in base64 n:phase1-dhgroup:5 n:phase1-keylen:0… Leer más »
This is what I do when I install Arch Linux to improve the fonts. You may consider the following settings to improve your fonts for system-wide usage without installing a patched font library packages (eg. Infinality): Install some fonts, for example: sudo pacman -S ttf-dejavu ttf-liberation noto-fonts Enable font presets by creating symbolic links: sudo… Leer más »
In order to access samba shares through GNOME Files, Nemo, Caja, Thunar or PCManFM, install the gvfs-smb package, available in the official repositories. sudo pacman -S gvfs-smb
For kernels >4.11 git clone -b extended https://github.com/lwfinger/rtlwifi_new.git make sudo make install modprobe -v rtl8723de ant_sel=2 ant_sel=2 shows the maximum WiFi signal gain. added below lines in a separate conf file: echo «options rtl8723de ant_sel=2» >> /etc/modprobe.d/rtl8723de.conf
Set up WIFI ifconfig wifi-menu iwconfig ip link set wlp0s20u3 up iwlist wlp0s20u3 scan ifconfig -a passwd root systemctl start sshd To modify the layout, append a corresponding file name to loadkeys(1), omitting path and file extension. For example, to set a Latin keyboard layout: # loadkeys la-latin1 WIFI ENABLED 1ST: https://wiki.archlinux.org/index.php/WPA_supplicant 2d an… Leer más »
Install the ELRepo and GPG key rpm –import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org yum install -y http://www.elrepo.org/elrepo-release-7.0-2.el7.elrepo.noarch.rpm Enable kernel updates from elrepo yum-config-manager –enable elrepo-kernel Remove old kernel stuff yum remove -y kernel-{devel,tools,tools-libs} Install the ELRepo built kernel and grub2-tools yum install -y kernel-ml kernel-ml-{devel,tools,tools-libs} grub2-tools We ensure these exist on the off chance they were removed during the… Leer más »
Posted August 8, 2017 by Peter Teoh To increase the disk size inside the VMware guest running CentOS7 (7.3, 1611) these are the steps needed: a. Remove all snapshots from your Vmware image, or if you cannot afford to remove the snapshot, shutdown the guest OS, and «clone from snapshot» (you can select any specific… Leer más »
http://info.cern.ch http://info.cern.ch – home of the first website From here you can: Browse the first website Browse the first website using the line-mode browser simulator Learn about the birth of the web Learn about CERN, the physics laboratory where the web was born