Liraz Siri – Mon, 2010/03/08 – 14:10 – 14 comments | Latest by Ryan Ever tried logging into a machine with ssh and found you have to wait much longer than reasonable for the session to start? This happened to me a few times and was especially annoying with machines on my local network (or… Read More: ssh session slow to start ( its dns ) »
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=482193093532802&parent=SrDetailText&sourceId=3-13274423271&id=1019467.1&_afrWindowMode=0&_adf.ctrl-state=nhmqwbzoc_21 Applies to: SPARC T4-1 – Version All Versions and later Sun SPARC Enterprise T5120 Server – Version All Versions and later SPARC T3-1 – Version All Versions and later Sun SPARC Enterprise T5140 Server – Version All Versions and later Sun SPARC Enterprise T5440 Server – Version All Versions and later All Platforms… Read More: ldoms solaris sparc ldom ldm »
To scan new FC luns, Just execute the below commands. Scanning FC/SAN LUNS 1 cfgadm -al To scan FC luns 2 devfsadm -c disk To make sure all the device files are created 3 tail /var/adm/messages To see the new LUN’s information 4 echo |format To get the new LUN’s information 5 ls -lrt /dev/rdsk… Read More: To scan new FC luns , disks, fiber channel »
(method 1) ALREADY RUNNING PROCESS INTO BACKGROUND Pro: Puts running process into background Con: If you quit out of the shell window the process stops Reference: http://www.unix.com/unix-advanced-expert-users/78975-make-foreground-running-process-run-background-without-hang-up.html 1. Ctrl-z 2. jobs or alternate method which lists the PID (note the PID is not the jobnum, the job number is shell specific to… Read More: Jobs – Move Running Process to Background & Nohup »
zfs create rpool/db2 zfs create rpool/db3 zfs create rpool/db4 zfs create rpool/db5 zfs create rpool/db6 zfs create rpool/db7 zfs set mountpoint=/db1 rpool/db1 zfs set mountpoint=/db2 rpool/db2 zfs set mountpoint=/db3 rpool/db3 zfs set mountpoint=/db4 rpool/db4 zfs set mountpoint=/db5 rpool/db5 zfs set mountpoint=/db6 rpool/db6 zfs set mountpoint=/db7 rpool/db7 snapshot zfs snapshot rpool/db1@mig1 zfs list zfs rollback rpool/db1@mig1… Read More: zfs notes »
http://thegeekdiary.com/zfs-tutorials-creating-zfs-snapshot-and-clones/ By Sandeep 1 Comment ZFS snapshots zfs snapshot is a read-only copy of zfs file system or volume. They consume no extra space in the zfs pool and can be created instantly. They can be used to save a state of file system at particular point of time and can later be rolled back… Read More: ZFS Tutorials : Creating ZFS snapshot and clones »
windows wmic bios get serialnumber
In my presentation at Oracle Openworld, I showed a demo of how to easily clone a zone to make a copy for development or testing purposes. These were the steps, given that the zone oow01 was already set up and running. zonecfg -z oow01 export > oow43.cfg — dump the existing config to a file… Read More: zone cloning without shutdown »
Did you run the commands on the blade or the CMM? Please perform the commands as follows on the Blades SP. 1. from the SP of Blade# -> start /SP/faultmgmt/shell faultmgmtsp> fmadm faulty ( will list the faults ) faultmgmtsp> fmadm repair 86398567-631a-6e87-a44e-a3e20510 fmadm faulty ( clear any other UUID’s that appear ) faultmgmtsp> exit… Read More: Clear faulty state sparc T5000 »
guia rápida 1. En el servidor para crear la imagen: installadm create-service -a sparc 2. en el boot prompt setenv network-boot-arguments host-ip=192.168.24.225,router-ip=192.168.24.1,subnet-mask=255.255.255.0,file=http://192.168.24.213:5555/cgi-bin/wanboot-cgi boot net Solaris 11 sparc wanboot notes This page’s purpose is to be a guide for how to manually configure your own wanboot server by hand, rather than being «forced» to use oracle’s… Read More: Solaris 11 sparc wanboot notes boot network »