Use the following procedure to initiate a fast reboot of a SPARC based system when the config/fastreboot_default property of the boot-config service is set to false, which is the default behavior. To change the default behavior of the Fast Reboot feature so that a fast reboot is automatically performed when the system reboots, see Changing… Read More: How to Initiate a Fast Reboot of a SPARC Based… »
Geekbench 2.1.6 : http://www.primatelabs.ca/geekbench/ System Information Platform: Solaris SPARC (64-bit) Compiler: Sun Studio 12 Operating System: SunOS 5.11 sun4v Model: sun4v Motherboard: sun4v Processor: SPARC-S7 Processor ID: SPARC-S7 (chipid 0, clock 4267 MHz) Logical Processors: 128 Physical Processors: 1 Processor Frequency: 0.00 Hz L1 Instruction Cache: 0.00 B L1 Data Cache: 0.00 B L2 Cache: … Read More: geekbench SPARC-S7 »
Geekbench 2.1.6 : http://www.primatelabs.ca/geekbench/ System Information Platform: Solaris SPARC (64-bit) Compiler: Sun Studio 12 Operating System: SunOS 5.11 sun4v Model: sun4v Motherboard: sun4v Processor: SPARC-M7 Processor ID: SPARC-M7 (chipid 0, clock 4133 MHz) Logical Processors: 512 Physical Processors: 1 Processor Frequency: 0.00 Hz L1 Instruction Cache: 0.00 B L1 Data Cache: 0.00 B L2 Cache: … Read More: geekbench t7-2 »
Mystery School Diary Day 2: How to Draw Metatron’s Cube Drawing the Flower of Life It’s important to know that you will need a compass to draw the Flower of Life. I’ve attempted drawing a rough sketch of it before without a compass and it was an extremely difficult task. The following steps will help… Read More: metatron cube »
Install pyLoad Raspberry Pi for Download Management 1 2 0 pyLoad is a tool used for downloading files from online storage lockers. These storage sites are usually plagued with nags like waiting for bandwidth restrictions to expire or slow downloading speeds. pyLoad will automatically download lists of files that you add from the storage lockers.… Read More: Install pyLoad Raspberry Pi for Download Management »
sudo pkg set-publisher -k /tmp/pkg.oracle.com.key.pem -c /tmp/pkg.oracle.com.certificate.pem -G «*» -g https://pkg.oracle.com/solaris/support/ solaris para borrar el repositorio por default: pkg unset-publisher solaris pkg update –accept
setenv network-boot-arguments host-ip=192.168.1.225,router-ip=192.168.1.1,subnet-mask=255.255.255.0,file=http://192.168.1.213:5555/cgi-bin/wanboot-cgi boot net -s failsafe root/solaris (default password) As you can see in the configuration file root is a role Assign the root role to your local account. # usermod -R root jdoe-local root@db04:~# cat /etc/user_attr # # The system provided entries are stored in different files # under «/etc/user_attr.d». They should not… Read More: Reset Solaris 11 root password x86 sparc »
vim /etc/sma/snmp/snmpd.conf Restart svcadm restart svc:/application/management/snmpdx:default svcadm restart svc:/application/management/dmi:default svcadm restart svc:/application/management/sma:default Solaris 10 Edit community string, acl on config file: /etc/sma/snmp/snmpd.conf By default SNMP service is installed and enabled on Solaris 10 with service name: sma After change config file you need to restart sma service for changes take effect. # svcadm restart sma… Read More: Editing SNMP Support for Solaris 10 OS »
set /HOST/bootmode script=»setenv auto-boot? false» reset /SYS Choose the appropriate shutdown method from the following table to reach the ok prompt. Caution – When possible, reach the ok prompt by performing a graceful shutdown of the OS. Any other method used might result in the loss of system state data. System State What To Do… Read More: Display the ok Prompt OpenBoot PROM »
Patches and Packages Are Out of Sync The target system must be running the same versions of the following required operating system packages and patches as those installed on the original host. Packages that deliver files under an inherit-pkg-dir resource Packages where SUNW_PKG_ALLZONES=true If packages and patches are different between the original host and the… Read More: Resolving Problems With a zoneadm attach Operation »