https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=482193093532802&parent=SrDetailText&sourceId=3-13274423271&id=1019467.1&_afrWindowMode=0&_adf.ctrl-state=nhmqwbzoc_21   Applies to: SPARC T4-1 – Version All Versions and later Sun SPARC Enterprise T5120 Server – Version All Versions and later SPARC T3-1 – Version All Versions and later Sun SPARC Enterprise T5140 Server – Version All Versions and later Sun SPARC Enterprise T5440 Server – Version All Versions and later All Platforms… Leer más: ldoms solaris sparc ldom ldm »

To scan new FC luns, Just execute the below commands. Scanning FC/SAN LUNS 1 cfgadm -al To scan FC luns 2 devfsadm -c disk  To make sure all the device files are created 3 tail /var/adm/messages To see the new LUN’s information 4 echo |format To get the new LUN’s information 5 ls -lrt /dev/rdsk… Leer más: To scan new FC luns , disks, fiber channel »

zfs create rpool/db2 zfs create rpool/db3 zfs create rpool/db4 zfs create rpool/db5 zfs create rpool/db6 zfs create rpool/db7 zfs set mountpoint=/db1 rpool/db1 zfs set mountpoint=/db2 rpool/db2 zfs set mountpoint=/db3 rpool/db3 zfs set mountpoint=/db4 rpool/db4 zfs set mountpoint=/db5 rpool/db5 zfs set mountpoint=/db6 rpool/db6 zfs set mountpoint=/db7 rpool/db7 snapshot zfs snapshot rpool/db1@mig1 zfs list zfs rollback rpool/db1@mig1… Leer más: zfs notes »

http://thegeekdiary.com/zfs-tutorials-creating-zfs-snapshot-and-clones/ By Sandeep 1 Comment ZFS snapshots zfs snapshot is a read-only copy of zfs file system or volume. They consume no extra space in the zfs pool and can be created instantly. They can be used to save a state of file system at particular point of time and can later be rolled back… Leer más: ZFS Tutorials : Creating ZFS snapshot and clones »

In my presentation at Oracle Openworld, I showed a demo of how to easily clone a zone to make a copy for development or testing purposes. These were the steps, given that the zone oow01 was already set up and running. zonecfg -z oow01 export > oow43.cfg — dump the existing config to a file… Leer más: zone cloning without shutdown »

Did you run the commands on the blade or the CMM? Please perform the commands as follows on the Blades SP. 1. from the SP of Blade# -> start /SP/faultmgmt/shell faultmgmtsp> fmadm faulty ( will list the faults ) faultmgmtsp> fmadm repair 86398567-631a-6e87-a44e-a3e20510 fmadm faulty ( clear any other UUID’s that appear ) faultmgmtsp> exit… Leer más: Clear faulty state sparc T5000 »

guia rápida 1. En el servidor para crear la imagen: installadm create-service -a sparc 2. en el boot prompt setenv network-boot-arguments host-ip=192.168.24.225,router-ip=192.168.24.1,subnet-mask=255.255.255.0,file=http://192.168.24.213:5555/cgi-bin/wanboot-cgi boot net Solaris 11 sparc wanboot notes This page’s purpose is to be a guide for how to manually configure your own wanboot server by hand, rather than being «forced» to use oracle’s… Leer más: Solaris 11 sparc wanboot notes boot network »

http://solaris11adventures.blogspot.mx/2013/05/migrating-solaris-10-zone-to-solaris-10.html So there’s an official Oracle procedure somewhere. Mine just goes into a little more detail and putting in workarounds for some of the bugs I found. *Edit: Points 5 and 11 is not necessary with the latest Solaris packages installed. Zone name: zone1 On old (Solaris 10) global zone: zoneadm -z zone1 ready cd… Leer más: Migrating a Solaris 10 zone to a Solaris 10 branded… »