up arrow = <CTRL-P> shows last command down arrow = <CTRL-N> brings one command up <CTRL-A>  takes the cursor all the way to the front of your current command <CTRL-E> takes the cursor all the way to the end of your current command left arrow = <CTRL-B> move backward character right arrow = <CTRL-F> move forward character Backspace… Leer más »

Configuring logging synchronous command on the console port to hold messages until detects no input from the keyboard. R1_1841(config)#line con 0 R1_1841(config-line)#logging synchronous exec timeout: R1_1841(config-line)#exec-timeout ? Timeout in minutes #####For educationals purposes###### R1_1841(config-line)#exec-timeout 0 0 R1_1841(config-line)#end ###Default time exec is 5 minutoes##### R1_1841(config-line)#exec-timeout 5 0 R1_1841(config-line)#end

R1_1841(config)#banner ? LINE c banner-text c, where ‘c’ is a delimiting character exec Set EXEC process creation banner incoming Set incoming terminal line banner login Set login banner motd Set Message of the Day banner prompt-timeout Set Message for login authentication timeout slip-ppp Set Message for SLIP/PPP R1(config)#banner motd $ Mantenimiento al router $ R1(config)#banner… Leer más »

sw_usuarios(config)#interface ? Async Async interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface Filter Filter interface Filtergroup Filter Group interface GigabitEthernet GigabitEthernet IEEE 802.3z Group-Async Async Group interface Lex Lex interface Loopback Loopback interface Null Null interface Port-channel Ethernet Channel of interfaces Portgroup Portgroup interface Pos-channel POS Channel of interfaces Tunnel Tunnel interface… Leer más »

CONSOLE PASSWORD Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line con 0 Router(config-line)#password CCENT Router(config-line)#login Router(config-line)#^Z Router# *Jan 19 21:49:48.235: %SYS-5-CONFIG_I: Configured from console by console Router# TELNET PASSWORD Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line vty 0 4 Router(config-line)#password cisco Router(config-line)#login Router(config-line)#^Z *Mar 1 00:02:14.499:… Leer más »

January 16th, 2007 by Anthony Curreri If you are like me, you tend to click things just to see how they work. Sometimes they don’t work. At all. If you’ve mucked up the IP, vlan, etc settings and the Cisco ASDM can’t get into the device, it’s time for more desparate measures. There is a button… Leer más »