Configure Cisco routers to use Active Directory authentication — the router side

Takeaway: Did you know that you can leverage the Windows Active Directory username/password database to log in to your Cisco routers and switches? Last time, David Davis explained how to install, configure, and troubleshoot Windows’ Internet Authentication Service (IAS). To wrap up this series, this week he tells you how to configure your routers and… Leer más: Configure Cisco routers to use Active Directory authentication — the… »

Configure Cisco routers to use Active Directory authentication — the Windows side

Takeaway: Did you know that you can leverage the Windows Active Directory username/password database to log in to your Cisco routers and switches? In this two-part series, David Davis walks you through the process. This time, he explains how to install, configure, and troubleshoot Windows’ Internet Authentication Service (IAS). If your organization uses Windows, you… Leer más: Configure Cisco routers to use Active Directory authentication — the… »

Hot-standby

Hi All, I am fairly new to Solaris. I am running Solaris10 on a SunFire V240. I’d like to team mutliple NIC’s into a single interface with a single IP address. I’d like the to operate in a hot-standby mode (I have seen this done in Windows and Linux (via bond config) I have read… Leer más: Hot-standby »

IPMP – IP Network Multipathing

IPMP – IP Network Multipathing Link-based failure detection works via network interface kernel driver. (bge, qfe, ce, eri, hme…) Uniq MAC address/nic… On SPARC machine (set true, if there is false): [root@v240 /] eeprom «local-mac-address?» local-mac-address?=true [root@v240 /] ifconfig bge0 bge0: flags=1000843 mtu 1500 index 2 inet 172.16.50.64 netmask ffffff00 broadcast 172.16.50.255 ether 0:3:ba:54:bc:7d [root@v240… Leer más: IPMP – IP Network Multipathing »