Geekbench 2.1.6 : http://www.primatelabs.ca/geekbench/ System Information Platform: Solaris SPARC (64-bit) Compiler: Sun Studio 12 Operating System: SunOS 5.11 sun4v Model: sun4v Motherboard: sun4v Processor: SPARC-S7 Processor ID: SPARC-S7 (chipid 0, clock 4267 MHz) Logical Processors: 128 Physical Processors: 1 Processor Frequency: 0.00 Hz L1 Instruction Cache: 0.00 B L1 Data Cache: 0.00 B L2 Cache: … Leer más: geekbench SPARC-S7 »
Geekbench 2.1.6 : http://www.primatelabs.ca/geekbench/ System Information Platform: Solaris SPARC (64-bit) Compiler: Sun Studio 12 Operating System: SunOS 5.11 sun4v Model: sun4v Motherboard: sun4v Processor: SPARC-M7 Processor ID: SPARC-M7 (chipid 0, clock 4133 MHz) Logical Processors: 512 Physical Processors: 1 Processor Frequency: 0.00 Hz L1 Instruction Cache: 0.00 B L1 Data Cache: 0.00 B L2 Cache: … Leer más: geekbench t7-2 »
sudo pkg set-publisher -k /tmp/pkg.oracle.com.key.pem -c /tmp/pkg.oracle.com.certificate.pem -G «*» -g https://pkg.oracle.com/solaris/support/ solaris para borrar el repositorio por default: pkg unset-publisher solaris pkg update –accept
setenv network-boot-arguments host-ip=192.168.1.225,router-ip=192.168.1.1,subnet-mask=255.255.255.0,file=http://192.168.1.213:5555/cgi-bin/wanboot-cgi boot net -s failsafe root/solaris (default password) As you can see in the configuration file root is a role Assign the root role to your local account. # usermod -R root jdoe-local root@db04:~# cat /etc/user_attr # # The system provided entries are stored in different files # under «/etc/user_attr.d». They should not… Leer más: Reset Solaris 11 root password x86 sparc »
vim /etc/sma/snmp/snmpd.conf Restart svcadm restart svc:/application/management/snmpdx:default svcadm restart svc:/application/management/dmi:default svcadm restart svc:/application/management/sma:default Solaris 10 Edit community string, acl on config file: /etc/sma/snmp/snmpd.conf By default SNMP service is installed and enabled on Solaris 10 with service name: sma After change config file you need to restart sma service for changes take effect. # svcadm restart sma… Leer más: Editing SNMP Support for Solaris 10 OS »
set /HOST/bootmode script=»setenv auto-boot? false» reset /SYS Choose the appropriate shutdown method from the following table to reach the ok prompt. Caution – When possible, reach the ok prompt by performing a graceful shutdown of the OS. Any other method used might result in the loss of system state data. System State What To Do… Leer más: Display the ok Prompt OpenBoot PROM »
Patches and Packages Are Out of Sync The target system must be running the same versions of the following required operating system packages and patches as those installed on the original host. Packages that deliver files under an inherit-pkg-dir resource Packages where SUNW_PKG_ALLZONES=true If packages and patches are different between the original host and the… Leer más: Resolving Problems With a zoneadm attach Operation »
Liraz Siri – Mon, 2010/03/08 – 14:10 – 14 comments | Latest by Ryan Ever tried logging into a machine with ssh and found you have to wait much longer than reasonable for the session to start? This happened to me a few times and was especially annoying with machines on my local network (or… Leer más: ssh session slow to start ( its dns ) »
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=482193093532802&parent=SrDetailText&sourceId=3-13274423271&id=1019467.1&_afrWindowMode=0&_adf.ctrl-state=nhmqwbzoc_21 Applies to: SPARC T4-1 – Version All Versions and later Sun SPARC Enterprise T5120 Server – Version All Versions and later SPARC T3-1 – Version All Versions and later Sun SPARC Enterprise T5140 Server – Version All Versions and later Sun SPARC Enterprise T5440 Server – Version All Versions and later All Platforms… Leer más: ldoms solaris sparc ldom ldm »
To scan new FC luns, Just execute the below commands. Scanning FC/SAN LUNS 1 cfgadm -al To scan FC luns 2 devfsadm -c disk To make sure all the device files are created 3 tail /var/adm/messages To see the new LUN’s information 4 echo |format To get the new LUN’s information 5 ls -lrt /dev/rdsk… Leer más: To scan new FC luns , disks, fiber channel »