Linux Tape Backup With mt And tar Command Howto

por | 12 septiembre, 2018



Magnetic tape is a non-volatile storage medium consisting of a magnetic coating on a thin plastic strip. Nearly all recording tape is of this type, whether used for video, audio storage or general purpose digital data storage using a computer. How do I make backup using tapes under Linux operating systems?

Linux (and other Unixish system) use mt command to control magnetic tape drive operation. You need to use mt command while working with tape drive. It allows you to reading and writing to tape.

The default tape drive under Linux is /dev/st0 (first SCSI tape device name). You can read more about tape drives naming convention used under Linux here. Following paragraph summaries command you need to use control tape drive for backup/restore purpose.

Rewind tape drive:# mt -f /dev/st0 rewindBackup directory /www and /home with tar command (z – compressed):# tar -czf /dev/st0 /www /homeFind out what block you are at with mt command:# mt -f /dev/st0 tellDisplay list of files on tape drive:# tar -tzf /dev/st0Restore /www directory:# cd /
# mt -f /dev/st0 rewind
# tar -xzf /dev/st0 www
Unload the tape:# mt -f /dev/st0 offlineDisplay status information about the tape unit:# mt -f /dev/st0 statusErase the tape:# mt -f /dev/st0 eraseYou can go BACKWARD or FORWARD on tape with mt command itself:
(a) Go to end of data:# mt -f /dev/nst0 eod(b) Goto previous record:# mt -f /dev/nst0 bsfm 1(c) Forward record:# mt -f /dev/nst0 fsf 1 Replace /dev/st0 with your actual tape drive name.

Linux Tape Backup Example

To backup to multiple tape use the following command (backup /home file system):
# tar -clpMzvf /dev/st0 /home
To compare tape backup, enter:
# tar -dlpMzvf /dev/st0 /home
To restore tape in case of data loss or hard disk failure:
# tar -xlpMzvf /dev/st0 /home

  • d : find differences between archive and file system
  • x : extract files from an archive
  • l : list the contents of an archive
  • p : ignore umask when extracting files
  • M : create/list/extract multi-volume archive (multiple tapes)
  • z : Compress backup using gzip
  • v : verbosely list files processed
  • f /dev/st0 : Tape device name
  • /home : Backup /home file system

Putting it all tougher

# A UNIX / Linux shell script to backup dirs to tape device like /dev/st0 (linux)
# This script make both full and incremental backups.
# You need at two sets of five  tapes. Label each tape as Mon, Tue, Wed, Thu and Fri.
# You can run script at midnight or early morning each day using cronjons.
# The operator or sys admin can replace the tape every day after the script has done.
# Script must run as root or configure permission via sudo.
# -------------------------------------------------------------------------
# Copyright (c) 1999 Vivek Gite <[email protected]>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit for more information.
# -------------------------------------------------------------------------
# Last updated on : March-2003 - Added log file support.
# Last updated on : Feb-2007 - Added support for excluding files / dirs.
# -------------------------------------------------------------------------
# Backup dirs; do not prefix /
BACKUP_ROOT_DIR="home sales"
# Get todays day like Mon, Tue and so on
NOW=$(date +"%a")
# Tape devie name
# Exclude file
# Backup Log file
# Path to binaries
# ------------------------------------------------------------------------
# Excluding files when using tar
# Create a file called $EXCLUDE_CONF using a text editor
# Add files matching patterns such as follows (regex allowed):
# home/vivek/iso
# home/vivek/*.cpp~
# ------------------------------------------------------------------------
#### Custom functions #####
# Make a full backup
	local old=$(pwd)
	cd /
	$MT -f $TAPE rewind
	$MT -f $TAPE offline
	cd $old
# Make a  partial backup
	local old=$(pwd)
	cd /
	$TAR $TAR_ARGS -cvpf $TAPE -N "$(date -d '1 day ago')" $BACKUP_ROOT_DIR
	$MT -f $TAPE rewind
	$MT -f $TAPE offline
	cd $old
# Make sure all dirs exits
	local s=0
	for d in $BACKUP_ROOT_DIR
		if [ ! -d /$d ];
			echo "Error : /$d directory does not exits!"
	# if not; just die
	[ $s -eq 1 ] && exit 1
#### Main logic ####
# Make sure log dir exits
[ ! -d $LOGBASE ] && $MKDIR -p $LOGBASE
# Verify dirs
# Okay let us start backup procedure
# If it is monday make a full backup;
# For Tue to Fri make a partial backup
# Weekend no backups
case $NOW in
	Mon)	full_backup;;
	Tue|Wed|Thu|Fri) 	partial_backup;;
	*) ;;
esac > $LOGFIILE 2>&1

Customize above shell script as per your needs and setup a cron job to execute it:
@midnight /path/to/