Installing pyLoad on a Raspberry Pi with Raspbian Jessie All credits for this guide go to eNBeWe. Thanks, mate! In the following I assume that you are running a Raspberry Pi with a recent version of Raspbian. At the point of writing this means you are running some version of Debian Jessie. First we are… Leer más »
cfgadm -al devfsadm -cV echo | format IMPORTAR POOL zpool import zrespaldo zfs list -o name,zoned,mountpoint Cambiarle a zoned=off ( para montar en zona global) zfs set zoned=off zrespaldo/respaldoDB Cambiar y verificar parametros zfs set mountpoint=/respaldoDB zrespaldo/respaldoDB zfs get mountpoint zrespaldo/respaldoDB zfs get mounted zrespaldo/respaldoDB #MONTAR UNIDAD zfs mount zrespaldo/respaldoDB
VerifyReverseMapping no LookupClientHostnames no in sshd_config and restart sshd.
svccfg -s network/dns/client setprop config/nameserver = net_address: «(192.168.25.21 192.168.24.22)» svccfg -s network/dns/client listprop config svcadm refresh dns/client cat /etc/resolv.conf
SELECT count(*) FROM pg_stat_activity; SELECT usesysid, usename,state FROM pg_stat_activity;
http://drghimire.com.np/simple-as-possible-computer-1-sap1-architecture/
«Linux used ideas from MINIX MINIX used ideas from UNIX UNIX used ideas from MULTICS MULTICS used ideas from CTSS CTSS used ideas from FMS» quote: Andrew S. Tanenbaum
The Art of Digital Design: Introduction to Top-down Design (Inglés) – 1 oct 1986 de David E. Winkel (Autor), Franklin P. Prosser (Autor) Chapter 7 Designing a Minicomputer Computer Architecture and Organization 3rd International Edition by John P. Hayes (Author) Publisher: McGraw Hill Higher Education; 3rd International edition (June 1, 1998) Language: English ISBN-10:… Leer más »
S1#conf t S1(config)#vlan 51 S1(config-vlan)#name ENG S1(config-vlan)#vlan 52 S1(config-vlan)#name MGMT S1(config)#int gi0/0 S1(config-if)#switchport mode access S1(config-if)#switchport access vlan 51 S1(config-if)#spanning-tree portfast S1(config)#int gi0/1 S1(config-if)#switchport mode access S1(config-if)#switchport access vlan 52 S1(config-if)#spanning-tree portfast S1#show vlan VLAN Name Status Ports —- ——————————– ——— ——————————- 1 default active Gi0/2, Gi0/3, Gi1/0, Gi1/1 Gi1/2, Gi1/3 51 ENG… Leer más »